Baumalight High flow Skidsteer Stump Grinder – S28

The S28 skid steer stump grinder is designed for high flow and higher horsepower skid steers. Baumalight’s most powerful model, the S28 adds a high volume hydraulic motor and a gearbox that increases the torque to the cutting head giving you the best of precision, power and speed in your stump grinding. Cutting depth is up to 15″ below ground with a swing radius of 63 degrees. The floating deflector safely directs the flow of debris for quick clean up. With it’s swing cylinder the S28 is a good choice for skidsteer stump grinding on close cut grass such as golf courses as well as for stump grinder rental on large skidsteers and track loaders. The high number of teeth means that each tooth needs to do less work. Each of the Stump Grinders teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time.

The bolt-on designed teeth allow for straightforward replacement. The massive ¾” thick steel rotor provides the back bone for the Stump Grinder cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Grinder with the extra momentum needed when the grinding is tough, making sure the Stump Grinder can power through the hardest stumps. The Stump Grinder’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure. We offer 8 pin and 14 pin AUX electrical plugs as well as the 7 pin Bobcat so you can use the controls in your cab with no extra wiring or hand controls.